We took this run down & very tired shop front & completely transformed its image.
A complete wrap of the existing fascia sign with a custom printed & matte laminated olive green background. With a 10mm PVC logo & brushed gold aluminium composite face, giving the logo taxt a lovery 13mm deep 3D effect. Finished off with 3mm brushed gold aluminium composite contact details at either end of the fascia sign.
​
With the transfomation almost complete, we added a custom window frame & surrounding PVc wrap.
_edited.jpg)
Another example of our shop signage options here at SIGNZ2u.
​
This is one of our classic 10mm PVc logos & lettering, fitted using sign locators to give that lovely 3D effect.
​
The French Bull Dog logo was finished off with colour matched painted edges to complete its look. Not seen many companies in the UK finishing off logos & lettering with colour matched edges!
​
A simple 3mm white PVc lettering fitted along the bottom panel. Stuck flush to the substrate using a high bond 3M VHB tape.
Here we have a classic example of the aluminium composite sign tray.
​
a 3mm thick 0.3mm skin aluminium composite panel, custom routered into a sign tray. Wrapped in a custom printed & matte laminated purple background, with white cut vinyl graphics applied.
​
These options give a very clean finish, with zero visible fixing visible following completion of the installation.
One of our favourite installations for a local tattoo shop.
​
This one has a little bit of everything really. Another custom made aluminium composite sign tray in traffic grey. With custom printed & laminated graphics to either end of the fascia sign.
​
Centrally we have 10mm PVc lettering with rear mounted LED modules to give a cracking HALO illumination when dark.
​
For the privacy windows, we have a combination of full colur printed graphics & silver etch frosting. All of which have been internally fitted.
A nice example of a more custom made fascia sign.
​
Starting off with 25mm x 50mm timber batten, mounted onto a black gloss amuminium composite panels for the 1st layer.
​
The second layer is a laminated wood effect timber panel, with 5mm cut PVc letters stuck flush to the surface.
​
Fisished off with a matte finished aluminium composite sign tray, with cut vinyl lettering & logos.
More of an economy, budget friendly installation for this example.
​
This is a full colour matte laminated print applied to an aluminium composite sheet. We then intall this flat to the fascia area substrate using 3M VHB tape & countersunk screws. And to ensure of a finish that is as clean as possible, we always (when possible) colour match screw coverings to hide those nasty looking screws or screwcaps, that you will sometimes see with a more budget friendly installation.
​
As you can see from this example picture. Screws visible on the left side, but not visible on the right. Even with budget friendly signage, we take every effort to ensure the finish is as clean & fixing free as possible
A nice combination of a budget friendly fascia back panel, with a little bit of character added with the locator mounted logo & lettering.
​
Another custom printed & matte laminated graphics applied to aluminium composite panels. Fitted using 3M VHB tape & countersunk screws.
​
Then to add that litte extra character we cut the lettering & logos from PVc & mounted using sign locatore for the 3D effect.
We also ensure our printed graphics are wrapped around the edges on all flat panel fascia installations. This again, hiding the panel adges & ensuring of that attention to detail, even on the budget friendly signage
A fully illuminated aluminium composite sign tray for this example.
​
This comprised of recessed opal acrylic illuminated lettering for the 'PROPERTY DEVELOPMENTS LTD' text. Along with built up fabricated acrylic 'HOMER' lettering and house logo.
​
Full internal illumination with waterproof drivers & LED modules for that low cost energy efficiency.
We also look o re purpose existing signage wherewe can. Not only to save you some money with what can sometimes be very expensive. But also very good for the environment. We will certainly let you know if we feel that the existing signs on the premises can be re purposed.
This was a full pink wrap of the existing fascia sign tray. With 3D built up acrylic letters which have been finished with a cerise pink lettering inlay for extra character.
We hope that these examples showcased on this page may have given you a little help in deciding what typ of signage finish you are looking for. But you may also find that there is nothing that catches your eye, or looks that way you invisage your signage to be.
​
All of our signage is custom designed & manufactured to axactly how you want it to be. We will advice on what we think could work for you, but ultimately we work to your wishes.
​
We can however, offer a completed design package. If you have absolutely no idea where to start, we are more than happy to put initial designs & suggestions together for you.